§ 39-62. Electronic message signs.

(a)

EMSs may be employed where a permanent sign is allowed and in accordance with the applicable sign height and area restrictions. A permanent sign permit must be obtained to install an EMS.

(b)

An EMS may be a portion of a building sign or freestanding sign or may comprise the entire sign area.

(c)

An EMS shall have automatic dimming controls, either by photocell (hardwired) or via software settings, to ensure that the EMS lighting level does not create a hazardous glare at night.

(d)

An EMS shall have a minimum display time of eight (8) seconds.

(e)

The transition time between messages or message frames is limited to three (3) seconds, and these transitions may employ fade. Continuous scrolling, traveling, flashing, spinning, rotating, and similar moving effects, and all dynamic frame effects or patterns of illusionary movement or simulating movement are prohibited.

(Ord. No. 2018-15 , § 2, 4-10-18)